SunSaver™
Solar Controller |
|
Click here for the SunSaver™ Operator's Manual
Morningstar’s SunSaver is the world’s leading small solar controller for both professional and consumer applications.
| SunSaver’s technology provides |
 Exceptional Reliability
PWM Battery Charging
Consistent High Quality
The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing:
Automated production
ISO 9002 quality programs
Latest power electronic technologies
Latest control and logic technologies
High volume manufacturing
Eight versions available (see back)
12 and 24 volts
6, 10 and 20 amps
100% solid state
Series design (not shunt)
True 0 to 100% PWM duty cycle
Setpoint accuracy to 35 mV
Rated for 25% overloads
Fully encapsulated in epoxy potting
Marine rated terminals/anodized case
Temperature compensation
Sealed/Flooded battery select
No need to derate
Parallel for 40 amps or more
Green charging/Red LVD indicators
Approved for use in hazardous locations Class 1, Division 2, Groups A, B, C, D.
| SunSaver Model Selection Chart |
| Mechanical Specifications |
Wire size #10 AWG (5.2 mm2)
Anodized aluminum case
Marine rated terminals
Epoxy encapsulated
Weight is 8 oz (0.23 kg)
| Electrical Specifications |
| |
12 Volt |
24 Volt |
| Rated Solar Input |
6.5 /10/20 A |
| Rated Load |
6/10/20 A |
| 25% Current Overload |
5 min.
|
| Regulation Voltage: |
| Sealed Battery |
14.1 V |
28.2 V |
| Flooded Battery |
14.4 V |
28.8 V |
| Load Disconnect |
11.5 V |
23.0 V |
| LVD Reconnect |
12.6 V |
25.2 V |
| Temp. Comp. (mV/°C) |
–28 |
–56 |
| Self-consumption |
6 to 10 m |
| Operating Temp. |
–40 to +85ºC |
Click the image above for a larger more detail veiw
WARRANTY: Five year warranty period. Contact Morningstar or your authorized distributor for complete terms.
Click here for the SunSaver™ Operator's Manual
|
